Dear Raj,
In the WCM we have 2 types. 1. Standard and 2. Enhanced Model.
If your client is planning for Enhanced Model.
In this you have 1 Main PTW and 7 Supplementary Permits and 1 WCD.
Based on the client Requirement we will configure the system and well as the Supplementary Permits.
The snapshots which you have upload is the Enhanced Model. There is small difference in the Work Permit Management, in this you will have 2 level of permits. it is also depend on the client.
Configuration Steps:
1. Maintain Application Profile (In this you need to Maintain to which plant you want to maintain WCM).
2.Assign the Model ( In this which model to do want to assign Enhance or standard).
3. Assign and Maintain application (In this how many supplementary permits do you want to create like..Hot work, height, etc..).
4.Define Description (Enter the description of the Supplementary Permits)
5. Defining the usages.
6.Define the catalogs.
7. Define the Approval and assign to the Supplementary Permits.
these are the important steps for configuration of WCM. If required any more post the issue we can clear it.